USED Fujifilm Instant Camera instax WIDE Evo "Cheki"

Product Features

• A 2-in-1 device for both camera and printer. Select your favorite photo and print it. You can also turn your smartphone images into instax prints.
• Equipped with the widest lens in instax history. The charm of wide format is further enhanced by switching modes.
• Features 6 types of frames to further enhance the artistic feel.
• Express rich nuances with 10 types of film effects.
• Control light as you wish with 10 types of lens effects.
• The degree of each lens effect can be adjusted in over 100 steps by rotating the lens ring, greatly expanding your creative possibilities.
• Send smartphone images to the camera body for instax printing.
• Remotely control your smartphone from the camera to take pictures.

Product Specifications

・Camera Functions

• Film Used: FUJIFILM instax WIDE Instant Color Film
• Image Sensor: 1/3-inch CMOS with primary color filter
• Recording Pixels: 4608 × 3456 pixels (when wide-angle switch is ON and micro SD card is used), 2560 × 1920 pixels (other than above)
• Recording Media: Internal memory, micro SD/micro SDHC card
• Recording Format: DCF compliant Exif Ver 2.3
• Focal Length: f=16mm (35mm film equivalent)
• Aperture: F2.4
• Autofocus: Single AF, Face Detection AF (ON/OFF switchable) (with AF assist light)
• Shooting Distance: 10cm ~ ∞
• Shutter Speed: 1/4 sec ~ 1/8000 sec (automatic switching)
• ISO Sensitivity: ISO100~1600 (automatic switching)
• Flash: Auto flash / Forced flash / Flash off
• Effective Flash Range: Approx. 30cm ~ 1.5m
• Image Effects: 10 types of lens effects (with degree adjustment function), 10 types of film effects, 6 types of film styles can be combined for expression. ・Print Functions
• Exposure Pixels: 1600 × 1260 dots (800 × 1260 dots when printing from smartphone app)
• Exposure Resolution: 25 dots/mm × 12.5 dots/mm (635×318 dpi, 40×80 μm dot pitch) (12.5 dots/mm (318 dpi, 80 μm dot pitch) when printing from smartphone app)
• Exposure Gradation: 256 gradations for each RGB color
• Interface: Compliant standard Bluetooth Ver.5.1
• Printable Image Formats: JPEG images taken with this unit (from internal memory and memory card), JPEG, PNG, HEIF images (from smartphone)
• Print Output Time: Approx. 16 seconds
• Print Function: Can print images from internal memory and memory card. ・Other
• Smartphone App Connectivity: Smartphone image printing function, remote shooting function, transferred print data function, firmware update function
• LCD Monitor: 3.5-inch TFT color LCD monitor
• Number of Pixels: Approx. 460,000 dots
• External Interface: USB Type-C (charging only)
• Power Supply: Lithium-ion battery (built-in)
• Number of Prints: Approx. 100 prints (from full charge; varies depending on usage conditions)
• Charging Time: Approx. 2-3 hours (varies depending on temperature)
• External Dimensions: 138.7 mm × 125 mm × 62.8 mm (excluding protrusions)
• Weight: Approx. 490g (excluding film cartridge, recording media, and lens cap)
• Operating Environment: Temperature 5°C~40°C
• Humidity: 20%~80% (non-condensing) *Specifications are subject to change for performance improvement.